Types and brands of adhesives for gold leaf, DIY recipes

Types of gold leaf and application technology

Full-fledged work with gold leaf is impossible if you do not understand its types. A certain category is suitable for a specific job. If you need to decorate a product by a needlewoman, you will need one type of gold leaf. For one-time use or widespread production, another one will be required. The type of material is also determined based on the texture that needs to be decorated.

Liquid

It has a bright metallic shine and consists of pigments, varnishes, and solvents. Is chrome plated paint. Used for glass, wood, metal surface, plaster, ceramics. Liquid gold leaf has high moisture resistance, strength, and does not oxidize. The consistency is similar to sour cream, not too thin and not too thick.

Before working with gold leaf, the product is thoroughly cleaned and degreased with alcohol. The liquid material is applied with a foam sponge or flat brush. First you need to paint the first layer. Leave it for several hours to dry completely and paint over the second layer. Depending on the product and material, gold paint can take about a day to dry. Liquid gold leaf is applied in several layers.

Today you can buy a special airbrush. This is a sprayer for liquid gold leaf, which helps to apply paint neatly and evenly. Application with an airbrush has a significant advantage - gold leaf dries quickly, about 2-3 hours. Ideal for needlewomen and craftsmen.

Roll

Used when it is necessary to apply gold paint to a large and even product. Sold in rolls 1-15 cm wide, about 50 meters long. Made on papyrus paper under pressure. It glues the joints and covers the seams.

To apply the rolled look, you will need a special glue for gold leaf. First, glue is applied in a thin layer and after a roll of material, then a layer of glue must be reapplied on top. For gold leaf, specialized transparent glue on a different base is used.

Leafy

Sheet material is used much more often than other types. It is great for handicrafts and craftsmen; it allows you to apply gold to any product: plaster, wood, glass, metal, ceramics, cardboard. Gilding with gold leaf in this case is carried out by analogy with the rolled type. First, a thin layer of glue is applied, then the material itself, a surface layer of glue.

Sheet gold is necessary when you need to cover a large surface. The materials are sold in the form of thin plates bound in thick books. One such book contains about 15 or more pages. The diameter of the plates is 16 or 15 cm, and has a bronze, gold or silver color.

Sheet gold leaf

Gilding with gold leaf should only be done after thoroughly cleaning the surface. It should be smooth, clean, and free of grease. You can apply primer before using gold leaf. For the sheet type, oil or water-based glue is usually used. In the first case, you will have to wait for it to dry for about 12 hours and then apply a leaf of gold leaf. In the second case, the material can be applied immediately after the glue.

To remove airy layers and unevenness, a cloth is used after applying the gold leaf. It is applied on top and all rough edges are carefully smoothed out. Gilding with gold leaf will last for a long time if the product is top coated with a special transparent varnish.

Chit

Craftsmen who make jewelry from epoxy resin like to use gold in the form of crumbs. It is sold in bulk form and often has multifaceted shades, which is beautifully reflected in the decorative product. This type is often used to decorate uneven objects with curves.

If the glue is water-based, the crumb is applied directly to the surface. The difference between the crumbs is that they are sprinkled onto the product. In order for the gold leaf to take root better, a layer of varnish must be applied on top.

Transfer

This type is considered reusable, since gold paint is applied in several layers to tracing paper, paper or parchment. A thin sheet is applied to the product until all the gold leaf is used. Practical and convenient to use. Often used by craftsmen and needlewomen. The work process is as follows:

• the product is degreased and cleaned;
• gold, bronze or silver paint is applied to the cleaned layer (it is not necessary to cover it with paint);
• after the paint has dried, glue is used for gold leaf;
• a sheet of gold leaf is applied on top;
• The film should be smoothed well and removed from the product.

How to glue transfer metal: instructions

In order for gold-plated products to retain their luxurious appearance for a long time, the selected element must be properly processed. We present step-by-step instructions on how to work with gold leaf:

1. Before starting the main work, the surface must be cleaned of dirt and degreased.
2. After this, the treated area and complex relief details are carefully coated with glue.
3. Then the adhesive is allowed to dry for some time in accordance with the instructions.
4. Next, a layer of gold plating is carefully applied. Most often, in the processing of decorative elements, a convenient gold leaf is used in the form of a thin film with a protective layer.
5. To transfer the foil to the surface of the product, the protective layer is removed from one side of the sheet. After that, the gold leaf is applied to the surface treated with glue and the film is smoothed with a special tool. Basically, a medium-hard art brush or a cotton swab is used for this.
6. When processing is complete, excess material is removed.

To protect the gold-plated surface from mechanical damage and extend the service life of the product, use gold leaf varnish. Professionals recommend using shellac, created specifically for metal surfaces.

In addition, acrylic mixtures are also suitable for similar purposes. But it is better to avoid water-based varnishes so that the film does not oxidize.

Review of popular brands

When repairing friction linings, car enthusiasts most often give preference to 3 adhesive compounds.

"VS-10T"

The glue consists of special resins and organic solvents. The parts to be glued are first put aside until completely dry, and only then are they placed under the press. In appearance, “VS-10T” is a viscous, homogeneous, transparent liquid of a beige or brown hue. This glue does not contain water, which makes it stable, even in the case of direct contact with liquid. The composition is also resistant to most aggressive environments: sea water, alcohol-containing liquids, acetone.

VS-10T adhesive is specially created for reliable fixation of materials in units that operate at temperatures up to 300 °C. It can be used at low pressure. The adhesive is widely used for bonding brake friction linings to a metal base. The composition guarantees high adhesion strength.

"Poxipol"

Two-component, high-strength, universal epoxy adhesive. Its main purpose is installation and construction work, but the Poxipol composition has proven itself well in gluing and repairing various mechanisms. After working with it, a seam forms on the surface. For this means it received a second name - “cold welding”.

The glue is sold in a set of 2 tubes:

• in a tube marked “A” - resin;
• in the second, with the designation “B” - hardener.

The set also includes instructions for use, a spatula, and a plate. The resin has high flexibility and guarantees increased adhesion of parts. Acceptable temperature for gluing is +18…+23 ˚С.

The disadvantages of the adhesive composition include:

• "Poxipol" is not suitable for working with polypropylene, polyethylene, Teflon;
• high cost of the product;
• Before applying the composition, it must first be prepared and then used for 5-6 minutes.

Natural glue is sold only in specialized stores.

Epoxy resin "ED-20"

Epoxy-diane resin is a reliable, universal, high-quality viscous liquid without mechanical impurities. Under the influence of the hardener, at normal room temperature + 20˚C, it turns into an infusible polymer.

Technical characteristics of the composition:

• shows resistance to moisture, mechanical damage, alkaline and acidic environments;
• the prepared mixture is used for 30-60 minutes;
• when compared with acrylic resins, the product is toxic;
• low elasticity - during movement, cracks may form on the surface that is coated with ED-20;
• has anti-corrosion and dielectric properties;
• provides high durability under heavy loads.

In industry it is used in its pure form. Without additional components of the composition “ED-20” is amber or orange in color.

Primary requirements

Metallized foil made of aluminum, an alloy of copper and zinc has a thickness of several microns. The coating is used for the creation and restoration of artistic products, decoration of bas-reliefs, and gratings. When working with gold leaf, precision in application is required, since when you try to straighten the film, it will tear. The foil is held in place with glue.

The adhesive composition must have good adhesion to the material on which gold leaf is applied and, in a solid state, retain its properties for a long time.

Review of the best manufacturers and brands

The choice of manufacturer should be taken very seriously. Now the market for decoupage glue is not yet so wide and is not subject to mandatory licensing. Therefore, there is a high probability of encountering a fake. Don’t be shy about asking for quality certificates and instructions for use.

Mod Podge PLAID

Mod Podge PLAID is an adhesive developed by an American manufacturer. It is used for outdoor work around the house. It glues slate, wood, concrete and metal best. It is not only an adhesive, but also acts as a sealant and adhesive for coating surfaces. It is one of the strongest lineups on the list. Suitable for decorating bulky items with large plates of material. Its peculiarity is that it dries in at least 15 minutes; you need to hold it all this time to ensure better adhesion.

Decola

Decola is a universal and effective adhesive created in Russia. It is designed to work with wood, glass or metal. The product cannot be called completely devoid of shortcomings; sometimes there are reviews online that it cannot cope with heavy layers. But the minimum price and ease of use make it possible for novice needlewomen to use it.

La Doratura

La Doratura is an adhesive that can hold even heavy surfaces together. It is intended for outdoor work, as well as decoupage. Copes with metal and wooden parts.

Art Potce

Art Potce is a popular product often used by Russian needlewomen. It combines the advantages of conventional glue and varnish. Works great on surfaces of ceramics, metal, wood, cardboard and natural stone. It can also be used to treat the surface of products, as it leaves a bright shine. But one cannot note the strong strength of the glue - products coated with it are better placed as home decoration, rather than actively used.

Glitter art potch

Glitter art potch is a unique tool that not only holds parts of the product together, but also helps decorate it. Leaves holographic particles, like tiny sparkles.

Kerzen Potch

Kerzen Potch is used for working with paper napkins and fabrics. But the main area of ​​its use is wax products. Due to the fact that the wax particles contained in the composition do not melt the picture when burned in the wax. The composition reliably glues the parts together and does not come off from the surface of the candle or other material. It dries in 1-2 minutes, and does not leave an unpleasant odor, yellow spots or smudges.

Porcelain glue

Porcelain glue is used for decorating glass, ceramic and porcelain products. It is used to decorate dining utensils and services. The peculiarity of porcelain glue is that it must be dried in a special hot oven for at least 90 minutes. But then you can use plates, jugs, glasses without fear for your health, and you can also easily wash them in the normal dishwasher mode.

"Mordan"

"Mordan" is an Italian-made glue. Its distinctive feature is its ability to work with water-repellent surfaces. They cover glass and ceramics with gold leaf or gold leaf. The cost of glue is quite high, but only it is used for decorating expensive surfaces (others can damage expensive materials).

Mod Podge

Used to work with metal, concrete, wood and slate. Although it is intended for outdoor work, needlewomen around the world actively use it for decoupage. It is particularly effective and dries in 15 minutes.

Decorating instructions

Let's consider the procedure for decorating using the example of the "Tair" composition:

1. Degrease the surface.
2. If it strongly absorbs mixtures applied to it, then preliminary priming will be required, for example, with an adhesive composition (gypsum and wood are characterized by increased absorption).
3. Apply a thin layer of glue to a dry and clean surface using a brush and leave for 5-10 minutes to dry. After this time, the composition should become transparent.
4. Attach the inner sheet of transfer gold, gently smooth it with a cotton swab, and remove excess glue.
5. Tear off the film sharply.
6. After finishing decorating, wash your brushes with warm water as soon as possible.

Advice! To provide gilding with protection from oxidation, coat the surface with a special varnish. Daily ART or Ferrario are suitable for this purpose.

How to make mixtion with your own hands: two recipes

Craftsmen have been using their own secrets for many centuries to prepare Mordan glue. Previously, this art was practiced by icon painters; they found a way out in simple improvised means, creating masterpieces that are still revered by connoisseurs to this day.

And today you can make simple potali glue with your own hands from what you have in the kitchen. Experienced craftsmen use egg whites, garlic juice, sugar syrup, starch and other astringents. We suggest you take note of the two most durable and easiest to prepare compositions, recognized by the majority of decorators.

DIY starch glue

So, you will need a glass of water, 70 g of granulated sugar, 1/3 cup of food starch and a tablespoon of white vinegar. To prepare, follow these steps step by step:

• heat 200 ml of water until warm, dissolve sugar in it and bring the syrup to a boil;
• pour vinegar into the mixture and mix the mixture thoroughly.
• the liquid should be kept on the fire for no more than half a minute;
• add starch to the syrup, constantly stirring the emulsion;
• When the resulting mixtion has cooled, its consistency should resemble sour cream.

The advantages of this composition are that it becomes completely transparent and invisible as it polymerizes. At the same time, a homemade starch mixtion firmly fixes the foil on the surface of the products.

Creamy face for gold leaf

So, mixtion for gilding can also be prepared using milk cream. To create the glue you will need to take 100 ml of cognac and the same amount of heavy cream.

Initially, the components are thoroughly mixed and applied to the surface prepared for gilding. The composition is allowed to dry for 30-60 minutes. After this time has passed, it’s time to start processing the product with a shiny film.

Alcoholic

The alcohol-based composition is characterized by stable and long-lasting stickiness of the adhesive layer (tack-free). Thanks to this, the gold leaf can be glued within 48 hours (SP series products). After fastening, the surface will need to be coated with protective compounds to increase wear resistance.

Interesting fact Mordan was originally an oil glue for gold leaf. However, over time, the meaning expanded, and today on price tags Mordan is any composition for both gold leaf and gold leaf.

Choosing high-quality water- or alcohol-based glue for gold leaf

Potal is intended for decorative gilding and silvering of various surfaces - ceramics, wood, glass, gypsum stucco, metal, cardboard and plastic.

Depending on the task at hand, various brands of glue can be used in the work, such as:

Kolner Permacoll Size is a special acrylic-based adhesive for glossy gold plating. Permacoll has long-lasting adhesion, making it possible to cover a surface treated with glue with gold leaf for several hours.

The adhesive composition does not contain solvents and, if necessary, can be diluted with water. This brand of glue is widely used in decorating icons with artificial and natural gold, in the manufacture of handicrafts, interior items, etc.

Permacoll glue is available in two colors - transparent and red (pigmented with pigment to control the application of glue). A 100 ml jar of colorless glue costs about 700 rubles, red is sold a little more expensive.

Glue for transfer gold Tair

— universal transparent adhesive composition on a water basis. Designed to work not only with transfer gold, but also with other types of gold leaf (loose sheets and flakes).

Can be used to decorate any type of base: plastic, wood, metal, glass, etc. It is enough to apply a thin layer of glue and wait a few minutes, and you can start working.

Tair glue retains its adhesive ability for a long time, which makes working with it convenient and comfortable. Glue for gold leaf Tair is most often found on sale in 20 ml tubes and costs about 150 rubles. For large volumes of work, it is more profitable to buy glue in 100 ml jars (costs about 250 rubles).

Mordan "Ferrario"

— universal adhesive mixture for gold leaf and gold leaf. The composition is applied in a thin layer to the surface to be decorated and left for 15-30 minutes.

After the mordan has partially dried, you can begin gilding. Glue (mordan) for gold leaf after application does not lose its adhesive properties for two to three hours, which allows you to do the work carefully and slowly.

Mordan "Ferrario" is available in packages of 75, 250 and 1000 ml. The cost of a 250 ml jar is about 1200 rubles.

Recipe - how to make glue for gold leaf with your own hands

Ready-made adhesives for gold leaf are not cheap, so if you wish, you can make an analogue of store-bought mordan from available ingredients.

Here are two simple recipes:

Glue for gold leaf based on potato starch and sugar.

1. Dissolve 70 grams of sugar in 200 ml of warm water, put it on the stove, bring the solution to a boil.
2. Then add a teaspoon of vinegar to the mixture, mix and boil for another half a minute.
3. Remove the future glue from the heat and, stirring constantly, add a third of a glass of potato starch.
4. After cooling, the composition should resemble a creamy mass in consistency. The properties of this glue are close to PVA - after drying it becomes almost transparent.

Glue for gilding on cream and cognac.

1. Take 100 grams of heavy cream and the same amount of cognac, mix thoroughly - the glue is ready.
2. We apply the composition to the surface to be treated, wait about 30-60 minutes for the glue to dry and begin gilding.

How to glue - an example of working with transfer gold leaf

Method of using Tair glue when working with transfer gold leaf (foil on film):

1. Product preparation. The surface is degreased, highly absorbent substrates (gypsum, wood, etc.) are pre-primed with glue.
2. Applying glue. Apply a thin layer of glue to a clean, dry surface to be decorated using a brush.
3. Technological break. A 5-10 minute pause is maintained (during this time the glue will dry and become transparent).
4. Decoration. The inner side of the sheet of transfer gold is applied to the surface and carefully smoothed with a cotton swab, excess glue is removed. Then the film is removed with a sharp movement.
5. Varnish coating. If desired, to secure and protect the “gilding” from oxidation, you can coat the gold leaf with a special varnish (Ferrario, Daily ART, etc.).
6. Cleaning tools. After finishing work, brushes should be washed immediately with warm water.

VIDEO INSTRUCTION

Currently, chemists and technologists are managing to find an alternative option - to invent a material whose characteristics and appearance are in no way inferior to real gold used in arts and crafts! Meet, this is gold...

Types of adhesives for gold leaf gilding

Gilding with gold leaf requires careful selection of the adhesive mixture. Therefore, industrial production has recently made the task easier. Manufacturers offer all sorts of mordan options, which are optimized for different materials and working conditions. Thanks to this, handicraftsmen invented various techniques for applying gold leaf to products. Thus, new techniques provide an amazing effect that previously could only be dreamed of.

In the traditional sense, mordan is an oil glue for gold leaf. However, today this concept includes all types of adhesive mixtures for gilding and silvering with foil. Therefore, if you come across such a name in an unexpected context, take it as a synonym for any adhesive composition for applying gold leaf.

Alcohol based

Alcohol-based glue for gold leaf is the most convenient option for long-term painstaking work. The mixture retains its adhesive properties for two days from the moment of application. For this reason, it can be used to decorate rooms, complex bas-reliefs and any other structures.

In this case, you can start working almost immediately, since the liquid base evaporates immediately. Based on these properties, alcohol mixtures are most widespread among consumers.

Water based

The water-based adhesive is universal and easy to use. Several types of water-acrylic compositions are offered:

• glue, which has a paste-like texture, is used when working with plaster and wood, since these materials strongly absorb moisture;
• glue sticks and adhesives in tubes are relevant for fine work with miniature products;
• conventional water mixtures are used after preliminary preparation of working surfaces, including priming.

Water-based glue is often chosen to save money. It is quite convenient to use and suitable for amateur practice at home.

Oil

Oil formulations are used mainly by professionals. This type of glue is quite difficult to work with; it requires a dry room and precise film application technique. These mixtures belong to the classic Mordan recipes and are created on the basis of natural oils.

Typically, oil glue for gold leaf takes a long time to dry. Therefore, it is used for large-scale external work in dry weather. Drying accelerators are added to some compositions so that the mixture can be conveniently used on internal interior elements.

Benefits of Oil Based Adhesive

The positive characteristics of oil glue definitely include its environmental friendliness, as well as reliable fixation of gold leaf on the base surface.

This adhesive for gold leaf is often used in traditional outdoor projects where the strength of the finished product is important. For example, for gilding domes, fences and signs. In addition, oil adhesives do not require a special protective coating of the finished product.

Some useful tips

For those who have only recently discovered the art of gold leaf gilding, we remind you of a few simple rules. These recommendations will help you achieve better results and avoid annoying mistakes in your work:

The simplest but most important tip for working with gilding glue is to carefully study the instructions. Even if you have already worked with homemade formulations, still be sure to read the manufacturer's recommendations

Usually the bottle describes in detail the rules for using glue, timing of work and precautions. When applying gold leaf to an artwork, use gloves. Delicate foil fits the base well

However, for complete accuracy, protect the coating from foreign marks and stray fingerprints, and protect your skin from contact with sticky substances. If you are just learning to work with film gilding, then in order to save money you can train on homemade compositions. But on the other hand, a high-quality industrial mixture will allow you to better master the intricacies of the work and achieve excellent results without the threat of spoiling the surface.

Finally

If you like to do elaborate work with gold trim, then be sure to try professional materials. Only special compositions will allow you to achieve an impeccable decoupage effect.

For those who want to learn how to work with gold plating or hone their skills, we recommend watching the video instructions on how to glue gold leaf:

Potal is a material used for decorative purposes, having the external properties of gold. To work with it correctly and easily, you need to choose the right glue for the gold leaf and study the characteristics of the material. There are several types of decor that can be used on various surfaces that differ in volume, size, and texture. With the help of gold leaf it is easy to turn an ordinary decorative item into a gold-plated, bronze or silver one. An experienced craftsman can create a product that is indistinguishable in appearance from real precious metal.

Oil

Compared to alcohol analogues, oil-based adhesives are characterized by lower adhesive strength, which creates additional difficulties during operation. Oil compositions are characterized by increased demands on the level of humidity and temperature conditions in the room. When working with them, you should carefully monitor the thickness of the applied layer.

Advice! Oil mordans are not suitable for novice craftsmen, as working with them is quite difficult.

Advantages of oil mixtions:

• after hardening, they form a very durable gilding;
• additional application of protective agents (shellac or varnish) to increase wear resistance is not necessary.

Oily quick-drying mordans contain accelerators - driers. Conventional oil mixtions take a long time to polymerize, up to 12 hours, but they contain fewer impurities and more natural oils.

The drying time is always indicated on the packaging - this is the period that you need to wait after applying the glue and before decorating with the first sheet of gold leaf. The number of minutes will increase or decrease, depending on the temperature and humidity in the room, the thickness of the adhesive layer, and the characteristics of the base material.

Advice! If the air in the room is dry, then decorating should begin earlier; if the humidity is high, you should initially prefer a quick-drying mixtion.

Long-drying oil-based products are recommended for exterior decoration in dry and dust-free conditions, as well as for gilding large parts.

Quick-drying compositions are ideal for interior decoration, gilding of small parts, for decoration in conditions of high humidity and where there is a lot of dust.

How to replace gluten in baked goods. How can you replace fast food products in Lenten baking?

If everything is more or less clear with lenten soups, vegetable stews and porridges, then lenten dough and lenten baking in general raise many questions. The famous baker Alena Spirina tried to answer the main ones, for example, what can replace eggs and butter in Lenten baking.

To understand how to make Lenten baked goods really tasty, let’s figure out how the quality of the dough is affected by products that we are deprived of during Lent, and vegans always do. How does their absence affect the quality of finished products, and how can this absence be compensated for? How to replace butter in lean baking? Butter contains approximately 80% fat and 20% water. Thanks to butter, the dough becomes moist, flaky and voluminous. Shortbread dough becomes crumbly, including due to the steam that is formed when water evaporates from the oil. And no other fat will give the dough the taste and texture that is obtained when using butter. The closest, but not the healthiest alternative is margarine. If you are a categorical opponent of this product, then only ordinary vegetable oil remains. Which is not so bad, although it does not contain water, air, or emulsifiers that help retain a large volume of air, and therefore cannot affect the leavening of the dough. But vegetable oil perfectly envelops the flour, preventing gluten from developing excessively. Yes, shortbread dough mixed with vegetable oil will not be as layered and aromatic as with butter, but it remains crumbly and soft. And you can loosen it with baking powder. How can you replace eggs in lean baking? Eggs are responsible for forming the structure of some types of dough and are practically the only ingredient that simultaneously contains a significant amount of both natural thickeners (proteins) and leavening agents (fats and emulsifiers). You can also beat the eggs to add air to the dough. Eggs also prevent water from separating from fats. But we don’t have eggs, so we’ll have to forget about fluffy biscuits for now. But muffins are quite accessible to us, if you know how you can compensate for the lack of emulsifiers and leavening agents. You will have to create an emulsion forcibly, as in a vinegar salad dressing: mix vegetable oil with an acidic liquid, for example, fruit juice or coffee, jam syrup or fruit puree. If the cupcake recipe calls for a couple of eggs, try replacing them with ripe bananas, using as many by weight: for two eggs – 100-110 g of banana. Just add not just a banana mashed with a fork, but beat it with vegetable oil in the bowl of a blender or food processor: you will see what a stable emulsion you get! Sugar in Lenten BakingOften, Lenten baked goods seem too sweet. This is not surprising, because we have to compensate for the lack of butter and eggs with sugar, honey, and jam. Sugar not only softens the structure of the dough, but also attracts water, protecting it from excessive development of gluten. The more sugar you add to the dough, the softer it will be. If there is not enough sugar, the dough structure will not form properly and the dough will either not rise or rise and collapse. Sugar also retains the moisture content of the finished product, making it soft and protecting it from staleness. What are the options for lean baking? The easiest way to prepare lean yeast dough: it works well without baking at all, and with a minimum amount of it in the form of good vegetable oil and, if necessary , sugar. And so that the surface of the pie is ruddy and shiny, lubricate it with strong tea before baking and vegetable oil after. With crumbly pie dough, everything is also simple: just mix an equal amount of vegetable oil and water by weight and add about twice as much flour, which has added salt, baking powder and, for sweet pies, sugar. Just don't knead the dough until smooth, it can become rough. The most difficult thing is with cupcakes. Try to find a cake recipe that you generally like, and change it depending on the circumstances: use a different liquid, try playing with the taste of butter, add variety with additives: nuts, dried fruits, candied fruits, spices and herbs. Or pour the cake batter onto slices of fruit - apples, pineapples, oranges - it will look like a charlotte. Material taken from the Internet.

Paste recipe

Homemade flour paste is often replaced with wallpaper glue. Suitable for working with papier-mâché.

1. In the prepared container, a liter of water is brought to a boil.
2. Separately, 6 tbsp is diluted in a small amount of cold water. spoons of flour, the composition is stirred until a homogeneous consistency without large parts.
3. The flour solution is poured into boiling water in a thin stream.
4. With constant stirring, the mixture is brought to a boil.
5. The paste is cooling. It should have the consistency of thick jelly.

As soon as the paste has cooled, you can begin gluing the wallpaper. The prepared composition is sufficient for gluing two rolls of plain paper or light non-woven wallpaper with a paper base.

Additional options

Less often, users try to make other types of glue that serve as an alternative to store-bought products.

Glue stick

The glue stick is made from PVA. For the case, you need to take an old antiperspirant deodorant package that closes tightly. Make laundry soap (2 parts), add water (1 part). Dissolve in a water bath, pour in 4 tablespoons of PVA, cool. Then put the mixture into packaging and let it harden.

Super glue

Of course, it is impossible to make real super glue - it is prepared from cyanoacrylate with the addition of a number of complex chemical components. But you can still create a very reliable composition with your own hands. For this you will need:

• 125 g wood glue;
• 100 g sugar;
• 35 g slaked lime;
• 450 ml water.

Sugar is dissolved in water, lime is added, and heated for 30 minutes in a water bath. Next, crushed wood glue is placed into the solution and boiled until the mass is homogeneous. The product can be used for gluing metal, ceramics, porcelain.

Foam glue

Wood glue is best suited for gluing foam plastic. Casein glue is also suitable, which is mixed in equal parts with slaked lime. This product is ideal for fastening polystyrene foam when insulating a house.

Foam glue

Glue is made from acetone and polystyrene foam to join elements of glass, metal, and wood. The foam is crushed into crumbs and poured with acetone to completely cover it. A viscous mass is obtained almost immediately; it can be used like regular glue, after mixing well.

When making adhesives with your own hands, you can save a lot of money, especially if you are planning a major renovation of your house or apartment. The quality of the finished product may be somewhat inferior to the store-bought product, but it will definitely be safe for health and affordable!