Moment joiner – composition for carpentry work, “Express” for wood, instructions for using Super PVA D3, reviews

It is difficult to do carpentry work without specialized glue. Often it is replaced with nails, screws, a stapler, epoxy resin and much more, but if you need to connect two parts of a part for a really long time, you cannot do without glue! So, we have selected for you a rating of the TOP 7 carpentry adhesives! You will learn which one is better to choose, reviews, prices, characteristics from our material.

Glue moment joiner: instructions, description, application

Glue is an indispensable substance for repair work. “Moment Joiner” is an adhesive that has proven itself in working with wooden surfaces. But this is not its only purpose. We invite you to familiarize yourself with the properties of the product and the rules for its use.

Characteristic

The main ingredient in Moment Joiner glue is PVA. In addition, it contains a plasticizer, dye and additives that increase the strength and heat resistance of the glue. After drying, the substance has the color of light wood.

Types of glue vary in water resistance. Thus, D2 can withstand short-term exposure to water, and “super d3 waterproof” has a high degree of reliability when in contact with water. Sold in tubes and jars of various sizes: from 125 ml to several kilograms.

“Moment joiner” has gained popularity as a substance for gluing wooden objects, but its scope of application is not limited to this.

For what materials can the product be used:

• for wood,
• veneer,
• plastic,
• foam rubber,
• cardboard,
• coarse fabrics,
• accessories.

Positive properties:

1. Heat resistant.
2. Resistant to humidity.
3. Sets quickly.
4. Does not attract pests.
5. Suitable for all types of wood.
6. Invisible after drying.
7. There are no toxic impurities that can damage the structure of the wood.

Application

For maximum bonding reliability, a number of conditions must be met. Therefore, before gluing, read the manufacturer's recommendations and instructions. Below are general rules for handling Moment Joiner glue.

Instructions and rules for working with wood glue:

1. The tip of the nozzle is cut depending on the width of the required seam. The thinner it is, the smaller the cut is made.
2. Before treatment, surfaces are cleaned of dust and debris.
3. To remove excess fat, a solvent is used. The measure is necessary to improve the adhesion of the glue to the surface.
4. One surface is treated with glue using a spatula, roller or brush.
5. The surfaces to be joined must be kept fixed for about 10-15 minutes for the glue to work better. “Moment Express Joiner” sets much faster, so it is used for processing small parts.
6. Time for complete hardening is at least 24 hours.
7. The higher the humidity of the wood, the longer the glue will take to set.
8. You can use clamps or heavy objects for fastening.
9. The glue temperature should not be lower than +10 degrees.

Advice! If hard wood is being processed, then both parts are covered with glue.

Moment Joiner glue is a worthy option for woodworking and more. It is used to assemble new furniture and repair old ones. This product is an alternative to nails and screws, which only spoil the look.

goodklei.ru

Features of the product

There are several types of products from the Moment Joiner line; they differ in fillers, but in principle they have the same basic composition. It includes polyvinyl acetate (PVA) dispersion, dyes, plasticizers, and targeted additives. It is the latter that determine the strength of the glue and increase its moisture resistance and heat resistance.

The ability to withstand contact with moisture varies among different adhesives in this series. Some can only withstand short-term contact with water, others have a super strong degree of moisture resistance. In any case, adhesion to surfaces of all adhesives is high. The distinctive quality of the products is their environmental safety: they do not contain toxic or poisonous substances and can even be used in children's premises. All Moment Stolyar adhesives have hygienic certificates, quality certificates and compliance with European standards. The color of some products in the line is not the same as that of PVA, and even after drying, the area where classic glue is applied will resemble a section of light wood.

Other properties of the glue:

• shortened setting and drying period;
• absence of substances that attract pests;
• Completely invisible after drying.

The composition can be applied at any temperature above +10 degrees; there is also a limit on humidity - no more than 80%. Installation of wooden products at low temperatures causes a decrease in the level of adhesion, therefore the recommendations of the instructions must be followed. The approximate material consumption is 150 g/sq.m. m, in some cases it may increase. After complete drying, the adhesive joint becomes suitable for coating with varnish or paint.

Varieties

Different adhesives are not the same in cost, setting period and time until the products are ready for use, and in shades. Types of adhesives from the “Moment Joiner” line, which are presented in construction and hardware stores:

1. "Moment Joiner Express". A universal product, suitable for all types of wood. The glue has proven itself best when working with wood fiber, particle boards, and natural veneer. The composition is moderately moisture resistant. It has an accelerated drying rate, setting time depending on the moisture content of the wood and air temperature varies from 10 to 15 minutes.
2. “Moment Joiner Super-PVA” (class D2). This product is no less high-quality than the previous one; it glues all types of wood, as well as laminate, chipboard and fiberboard. The glue can is bright red in appearance, so it is easily recognizable. Its texture is transparent, and after drying the composition is not at all noticeable on the products. You can work with the product only in dry rooms or at moderately high humidity; it has low moisture resistance. 20 minutes is enough for complete setting.
3. “Moment Joiner Super-PVA Waterproof” (class D3). This glue retains the properties of the previous one, but has an increased moisture resistance rating. Also, “Moment” of this class has excellent cold resistance: it can withstand many defrosting and freezing cycles without losing quality. You can work with glue on wood and laminated substrates. Most often it is used to work with products in the bathroom, toilet, and kitchen.
4. "Moment Joiner Universal". Classic glue, which is a water-dispersion composition, is suitable for any type of wood, wood products, and combined materials. Consistency – translucent, color – beige. The initial setting index is 30 kg/sq.m. cm. After drying, there are no cloudy spots, streaks, or colored highlights left on the product. The product provides a strong, durable connection of parts. To improve the quality of adhesion, you need to fix the surfaces for at least 20 minutes.
5. "Moment Joiner Instant Grip." The composition of the product contains acrylic additives, due to which the time for the glue to set is reduced. This mounting tool only takes 10 seconds to secure the products together. It is easy to apply the glue; after drying there will be no traces left on the surface. The adhesion of the composition is enhanced, so it can be used for gluing wood to other materials, for example, plastic, metal. The product can withstand at least five cycles of freezing and defrosting.

Advantages and disadvantages

The advantages of different types of funds are also different. For example, the level of moisture resistance of “Super-PVA Waterproof” is very high; it practically does not react to a humid environment, while “Universal Glue” cannot boast of this property. Most adhesives can withstand temperatures up to +70 degrees, which is very convenient when working with veneer that needs to be heated during installation. The cost of “Moment” is low, it can be applied in a thin layer, this makes the product economical.

Other advantages of the composition:

• versatility, suitability for a huge number of materials;
• invisible after drying, no need to remove stains, stains, smudges;
• fast setting;
• environmentally friendly, no harm to health;
• excellent adhesion indicator;
• reduction of time for repair or installation of products.

The adhesive contains no components that could damage the structure of wood, artificial or combined materials. The adhesive joint is very durable; it will not collapse over many years of use.

“Moment” also has its drawbacks. The humidity of the material must be strictly controlled before starting work. If it exceeds 18%, it is better not to use gluing: adhesion and the quality of the adhesive joint will greatly decrease. The air temperature during installation must be sufficient (from +10 degrees), otherwise the drying time will seriously increase. The disadvantages also include the weak water resistance of class D2 glue, which can only be used for products located indoors and not in contact with water.

Adhesive Moment Joiner - areas of application, composition features

The Moment brand has long been recognizable and in demand in various areas of construction. Clay Moment Joiner is no exception. PVA glue from a well-known brand is produced in different volumes and is often used specifically for carpentry work.

Clay Moment Joiner

The content of the article

Features of the composition

The adhesive composition Joiner PVA universal has a number of distinctive features, among them:

1. It sets quickly, which is why it is often called express composition. At room temperature it needs no more than 10-15 minutes; if the room is warmer, the materials will stick together faster.
2. PVA Moment – ​​heat-resistant. That is, it can be used in high temperature conditions. In carpentry, this is necessary when creating a veneered surface. In the process of creating a veneer coating, it must be ironed with an iron or other heated surface.
3. Another distinctive feature of the adhesive composition is its strength. By following the manufacturer's recommendations regarding the use of Moment, you can get a truly strong connection. Its properties of high-quality bonding of materials remain the same for a long period.
4. Another important aspect is that Moment Joiner glue for wood is colorless, that is, it will not be noticeable at the seams between the parts being glued.

Materials

The adhesive composition Moment is successfully used:

• Any wood.
• Chipboard, plywood.
• Veneer.
• Facing.
• Cardboard.
• Accessories.

Convenient tube of glue

Flaws

This super composition still has its drawbacks, among them:

1. Its moisture resistance is weak, that is, it perfectly glues wood and other similar materials, provided that they are used indoors, then the strength is really high. A short-term increase in wood humidity up to 18% is allowed.
2. Wood glue Moment is not frost-resistant. It is not allowed to be stored at sub-zero temperatures, and work on gluing surfaces is not recommended even at +10⁰ and below.
3. Such adhesives are used to hold plastic together, but it does not work on all such surfaces. Although the instructions do not indicate this, it is recommended to carry out a test gluing.

Instructions for use

In order for the strength of the adhesive composition to be high, it is necessary to follow the rules for using glue for wood and wood materials Moment Joiner. Order:

• Processing of workpieces - burrs, dust, and shavings should be removed from the surface. The planes, including those for veneer coating, must be properly sanded. Parts must be carefully adjusted.
• Afterwards you can open the container with glue. It should be applied to both surfaces in a thin layer. To distribute as evenly as possible, you can use a special brush.
• After application, leave the glue to initially gain strength for 10-15 minutes.
• After the specified period, connect the parts together. In order for everything to go well, it is better to make connecting grooves in advance.
• The glue dries within 24 hours. After this, you can remove any remaining glue by cutting it off.

Method of use

Conclusion

Special adhesive for carpentry from the manufacturer Moment will help carry out repair work or create new furniture at the highest level. It makes carpentry work easier.

gipsohouse.ru

Comparison of the presented models

To make it easier to choose the ideal glue, we have compiled a comparison table:

PVA glue Moment joiner: description, characteristics, rules of use

Glue moment carpenter

The most universal PVA glue for wooden bases of any origin, be it hard wood (oak, ash, beech, walnut, etc.) or veneer, MDF, chipboard, is Moment Joiner. It is also well suited for gluing leather, fabric, paper and even some types of plastic. That is why it is very popular among both professional workers and home craftsmen. We can say that its versatility has captivated many craftsmen. This heat-resistant, quick-setting, high-strength adhesive composition is widely used for repairing and assembling furniture, gluing laminate, veneer, various accessories and other types of construction work. High adhesion is achieved through the use of PVA in the dispersion, as well as various additives, plasticizers and dyes.

Using PVA glue Moment joiner

It should be noted that a strong connection of the glued parts is achieved within the first 5 minutes after pressing. At the junction, an elastic, moisture-resistant seam is formed that is practically not subject to aging. With strict adherence to the instructions for use and operating rules of the product, maximum durability of the adhesive joint is achieved.

Basic instructions for use:

• Before gluing the parts with Moment Joiner glue, it is necessary to prepare the surface by removing all dirt and dust, and also degrease it with acetone or another solvent.
• Recommended moisture content of the wooden base is 8-12%. With higher wood moisture content, the setting time increases.
• It is recommended to carry out work at room temperature, about 200C.
• Apply PVA in a thin, even layer using a clean brush or roller. When gluing wooden parts, the adhesive composition is applied to both surfaces to achieve higher adhesion.
• After applying PVA glue, it is necessary to firmly press the surfaces together within the first 10 minutes, after which they can be left under pressure for up to 24 hours, often this time is enough for complete hardening. It is worth noting that, of course, the initial clamping force is important.
• Follow the directions for use on the label. Depending on the composition of the glued material, the setting time, as well as the application temperature, may vary.
• Do not use glue after the expiration date, because After this period, the properties of the glue are lost, adhesion and strength of the connection decreases.

In essence, this is a highly professional composition accessible to any user. Available in convenient packages, from large buckets - 30 kg, to small tubes - 250 g. Small packages are equipped with special caps, which greatly simplifies handling and reduces losses. The adhesive composition is from white to yellow, of medium viscosity.

Glue storage conditions

PVA Moment Joiner must be stored at room temperature, in tightly closed packaging, for no more than 2 years from the date of manufacture. Protect from high humidity and direct light. When frozen, it loses its properties, so you should not overfreeze it.

kleiexpert.ru

"Moment Joiner" - wood glue: characteristics, instructions, reviews

In the modern chemical market for construction needs, “Stolyar” glue is popular. This composition, which is also known as “Moment,” is produced at Russian production facilities by the German concern Henkel. The product is known as an excellent adhesive that copes not only with repairs, but also with the manufacture of wood products. It is often used in production and at home. It consists of a polyvinyl acetate dispersion with special plasticizers and additives that help improve adhesion and increase the reliability of the connection.

Why choose Moment Joiner?

No poisonous or toxic substances are used in the manufacturing process. This indicates the environmental friendliness and safety of the material and allows it to be used when it is necessary to repair items used in household use. You can verify the harmlessness of the product by reading the information from the quality certificate. By asking the seller for a certificate of conformity, you will be able to understand that the “Stolyar” glue meets European standards.

Consumer Reviews

When making various objects and furniture from wood, nails are not always used to connect elements. According to consumers, the aesthetic appearance deteriorates if there are extra holes on the surface. In this regard, manufacturers try to abandon them whenever possible, using other connection methods.

An excellent alternative to screws and nails is Moment Joiner glue. According to home craftsmen, in terms of grip it is only slightly inferior to metal products, but remains invisible after the product is completed. Consumers like that the glue does not contain impurities that could disrupt the natural structure of the wood.

A few more consumer opinions

The composition can be used to work with any material of this type. Which is what customers really like. The composition is not afraid of pests and is resistant to high temperature and moisture. With its help, according to customers, you can not only assemble new furniture, but also repair finished products.

Specifications

The described glue can be used for gluing:

• sheathing;
• fabrics;
• foam rubber.

With its help, products are completely assembled from pre-made blanks. In this case, no trace of fastening elements remains on the furniture, which improves aesthetics. The material has an increased water resistance class according to the international classification. It is able to withstand temperatures up to + 70 °C. It has a high adhesion density and is characterized by rapid setting after application.

The application temperature should not be lower than +10 °C so that the composition does not thicken, because under such conditions it quickly loses its characteristics. The average consumption of Moment “Joiner” glue is 150 g per square meter. After the joint hardens, it takes on the color of light-colored wood. If necessary, dry glue can be painted or varnished on top after hardening.

Release forms

If you want to achieve a high drying speed, you should purchase glue marked “Express”. It contains additives that accelerate the evaporation of the solvent. As a result, only solid fractions remain. Glue is used for small parts, because it is not as reliable as the standard version. With its help, you can glue edging or decorative elements that are usually not subject to high loads.

Glue Moment "Stolyar" is offered for sale in five packaging options. If you want to purchase the composition for household needs, a 125-gram tube is suitable for you. With its help you can repair furniture in your home. The spout in the package has a structure that allows you to control the consumption of glue and store it after use. There is no risk of the glue drying out.

You can choose jars that contain 250 and 750 g. They are usually purchased for the needs of a small carpentry workshop. Usually this “Stolyar” glue lasts for a long time, because on average a little mixture is used for one product. There is no point in purchasing more capacious packaging, because they can simply dry out. Large furniture factories require 3 kg or 30 kg buckets. The factory produces several dozen pieces of furniture every day, so the product will be used up quickly.

Instructions for using glue

No special knowledge is required to work with glue. You just need to follow the technology and be more attentive to preparing the workplace. Before you start applying the “Joiner” glue, you should process the workpieces. They should be free of shavings, wood dust and burrs. The surface must be sanded and leveled, as imperfections may reduce adhesion.

Before final work, it is necessary to carry out docking without mounting material. This is necessary to understand whether additional processing will be required. Once everything is ready, you can open the container with glue and apply it to both surfaces to be joined in an even, thin layer. To achieve maximum uniformity, use a soft bristle brush.

After the Moment Joiner glue has been applied, the parts are left for 15 minutes in the open air. It is not recommended to walk around the table during this so as not to raise dust. It should not settle on the surfaces to be glued. First, all sawdust and shavings that may interfere with normal gluing should be removed from the parts. Once the treated surface has settled, you can begin joining.

To ensure proper alignment of the parts, it is necessary to prepare guide grooves. If you hit them, it means that the element has fallen into place. The products are pressed against each other with maximum force. The glue should then dry within 24 hours. If necessary, after drying, you will need to remove the remaining mixture mechanically, only then can you begin the final processing of the furniture.

Purpose and reviews of Express glue

You can also find Moment Joiner Express glue on sale. It is moisture resistant and suitable for all types of wood. A mixture is prepared based on an aqueous dispersion. After just 15 minutes, reliable setting occurs. Consumers like the benefits of this mixture, among them the following should be highlighted:

• moisture resistance;
• possibility of use for external and internal work;
• absence of toluene and solvents;
• fast setting ability.

You can use glue not only for wood, but also for products made from it, namely:

• veneer;
• plywood;
• MDF;
• Fiberboard;
• chipboard;
• accessories;
• facing materials.

Moment Joiner Express glue can be used for gluing straw, cardboard and paper. It can be used to create crafts and also be used for heavy tasks, such as repairs or minor finishing work. The parts to be glued are pressed against each other and fixed for 15 minutes. If you are a professional, you should use clamps or a vice. When such tools are not at hand, the parts are pressed down with a press, for example, a bucket of water, books or other heavy objects.

Purpose and reviews of PVA Universal glue

This glue is based on PVA water dispersion and is suitable for all types of wood. Consumers like the main advantages inherent in this composition, among them the following should be highlighted:

• short setting time;
• initial setting force up to 30 kg/cm2;
• transparency after drying;
• lack of ability to paint wood.

Among the main areas of application of the Moment Joiner Universal glue, the following should be highlighted:

• Gluing fibreboard, chipboard, MDF.
• Gluing parts made of multilayer plywood.
• Installation work when gluing all types of wood is necessary.
• Bonding decorative laminate plastic.
• Working with veneer.

Moment Joiner PVA glue is applied to parts that need to be fixed within 20 minutes. Additionally, you can use clamps or a vice. The composition is sold in containers of different capacities, these can be jars of 250 and 750 g, as well as buckets of 3 kg.

fb.ru

Packaging and storage

Adhesives are available in a variety of containers. In everyday life, the most popular are 125 g tubes, as well as 250 g jars. Small packages are equipped with caps, making them more convenient to work with (you can screw the product tightly at any time). Typically, this glue is used to create crafts, carry out minor repairs to furniture and interior items, and for gluing corners of wallpaper.

There are also 750 g jars on sale. They are used for repair work, and are often added to wallpaper glue to enhance adhesion (to hold heavy canvases). Professionals usually choose 3 kg buckets, while furniture factories usually choose 30 kg buckets. Packages of 3 kg have a sealed lid, like larger containers, although under production conditions it is not necessary to store the glue for a long time. Instant Grip glue is available in additional 100g and 200g packs as it is often used for small jobs that require a quick and reliable bond.

The product should be stored at +5...+30 degrees in the original packaging, tightly twisted and closed. It must be protected from high humidity and direct sunlight. Despite its moderate frost resistance, it is better not to freeze the glue unless absolutely necessary. Otherwise, the frozen product should be brought into a room at room temperature and allowed to melt naturally. When used correctly, Moment adhesives from the Joiner series will become reliable assistants on construction sites and in repairs.

Glue moment joiner, characteristics and instructions

When repairing or assembling furniture, wooden models, laminate and other materials of such a structure, it is necessary to use glue - “Moment Joiner” is suitable for these purposes. In addition to the above materials, it is used when working with veneer, coarse fabrics, cardboard, fittings and plastic. It earned trust, so it became a common wood glue.

Characteristics

The main component of the Moment Joiner glue is PVA dispersion, the second most important is the plasticizer. Some additives increase bond strength and resistance to high and low temperatures. The material is tinted.

This set of components determines the important characteristics of the glue - it sets quickly, the strength reaches an average value after 5 minutes, and good heat resistance. Suitable for any type of wood, except that dense ones need to be processed more carefully.

Preparing for work

According to the instructions, before directly gluing the surfaces of interest, they must be properly processed in order to obtain a good base for applying “Moment Joiner”.

The surfaces being glued together must be thoroughly cleaned of dust, sawdust or other debris. The fit of the parts must be tight. If work is carried out with wood, then its humidity should not exceed 8-12%, otherwise the setting time will increase.

Some types of wood are treated with a solvent before gluing - this helps remove excess fat from the surface and increase the strength characteristics of the gluing.

Instructions for glue “Moment Joiner”

• If a thin gluing seam is required, the tip of the nozzle is cut off accordingly. The more layer needed, the more is cut off;
• Apply a thin layer of glue to one of the treated surfaces. To level the layer along the length of the material, use a spatula, roller or brush. If hard wood is glued, then glue is applied to the other surface in the same layer;
• The surfaces are pressed against each other, and wait at least 10-15 minutes for the glue to gain strength;
• The surfaces are clamped with improvised means or heavy objects to ensure complete fixation.

Using Moment Joiner glue is easy, but you need to remember that you cannot use it if the ambient temperature is below 10 degrees. Moreover, the glue does not tolerate frost - it must be protected from low temperatures.

sam-brigadir.ru

Instructions and operating rules

Before gluing the parts, you need to properly prepare both bases. To do this, the surfaces are cleaned of dust and dirt, old paint is removed from them, and grease is removed by wiping with alcohol and acetone. The optimal moisture content of wood is 8-10%, the limit of this indicator is 18%. At a humidity of 12-14% you need to be prepared for an increase in the setting time of the glue. It is advisable that the room temperature be about 20 degrees.

The procedure for working with glue is as follows:

1. Cut the tip of the tube nozzle to a size corresponding to the width of the required seam. If you purchased “Moment” in a jar or bucket, open the packaging.
2. Make sure the adhesive and materials being joined are at room temperature. It is better if they are heated to +23...+25 degrees.
3. Apply a thin layer of the product with a brush, roller or rubber spatula. To achieve better adhesion, both surfaces should be treated with glue.
4. Fix the products for 10-15 minutes for the glue to set. If the moisture content of the wood is high, this time must be increased. Vices and heavy objects can be used as clamps. It is best to leave the products in this position for a day - this is how long the adhesive seam needs until it is ready for use.
5. Remains of glue that extend beyond the seam must be removed mechanically (for example, wiped off with a damp cloth).

You need to be careful when working with Instant Grip glue. The parts should be folded correctly right away, because they will set almost immediately. For all adhesives from the Moment Joiner line, it is the high-quality initial fixation that is important, so immediately after applying the product the strongest pressure is ensured.

Glue Henkel Moment “Joiner” – Reviews

)Good carpenter's glue, for gluing different types of wood and wood-containing materials, as well as paper and glues leather well. The drying time is short, so it needs to die...

3 years ago

In my line of work I have to use glue. I need an adhesive with certain characteristics: so that it glues firmly, reliably and quickly, and at the same time so that it can be used...

3 years, 1 month ago Gravelte

Good afternoon everyone! This glue is very often found in our house and in the country. My husband is constantly repairing something, and sometimes I borrow it from him to create some handicrafts, and...

3 years, 1 month ago Bettleboursed

Good afternoon My friend really likes to decorate her furniture, especially if she already requires it. Once again I came to her and saw that she had a turn for that day...

3 years, 3 months ago Solappink

Hello! I would like to write a review about the Moment “Joiner” glue. When we renovated that year, we needed to lay linoleum. The floors in our apartment are wooden and therefore uneven. P…

3 years, 3 months ago Dwern

Hi all! I would like to introduce you to the water-dispersion express glue “Moment Joiner”. I bought it for myself to repair some furniture and small wood products. My choice fell on...

3 years, 3 months ago Carvaned

Today I want to tell you about Henkel Moment “Carpenter” glue. My husband often uses this glue at work, as he works in furniture production and at home. The glue sticks well...

3 years, 3 months ago Greachintisfuld

The glue is just like glue, ordinary for wood, ordinary, nothing special at all. On the back it was written that it dries in 15 minutes - but this is a lie, for me it only dried overnight...

3 years, 4 months ago Recause

I have several professions. One of them is a master bookbinder. I work only with genuine leather. As you understand, for bookbinding work of this quality you need very high quality…

3 years, 7 months ago Encoments

I have long been convinced that it is worth trusting Moment adhesives. They are much more reliable and more convenient to use than, say, some kind of superglue. I haven't bought it for a long time. Glue "…

3 years, 8 months ago Askersessaril

The book table broke and I urgently needed glue. It was necessary to glue the top of the table to the bottom. I asked my son to buy glue and he bought Henkel Moment “Joiner” Glue. Packaging for...

3 years, 10 months ago Memonyammething

I can’t sit still! As I wrote earlier in the review —> Chair with backrest TetChair 828S, out of the four chairs we ordered, two were delivered disassembled. And for several...

4 years, 1 month ago Cannotparth

During the renovation, they decided to use wooden corners to finish the jambs. The question arose of how to attach them to a plasterboard wall neatly, securely and unnoticeably. In the store we...

4 years, 7 months ago Satiter

The glue is only suitable for gluing small parts, it does not hold very tightly, and the gluing process is not at all pleasing. In general, it cannot be compared with the same wood glue that used to be...

4 years, 9 months ago Struindrish

I have long dreamed of purchasing wooden chairs and finally I got them. But I didn’t rejoice at this purchase for long; the chairs simply began to crumble at the joints. ...

5 years ago

I had the urge to assemble a model of a boat out of wood. I used to do this all the time, and I glued everything calmly with Soviet and post-Soviet PVA glue (well, remember these tubes I...

5 years, 2 months ago Porondor

This is the thickest PVA glue I have ever worked with. Using it for another purpose, for example for gluing paper, is simply inconvenient and expensive. Like most adhesives, it...

5 years, 3 months ago

We have Joiner glue at home in case we need to work with wood gluing. When dad was given the task in kindergarten to glue figures from plywood, the glue worked well...

5 years, 5 months ago Maliarked

There are 18 reviews in total in the section.

otzyv.expert

Moment Joiner

Product characteristics/application:

Glue for professional carpenters and home craftsmen. High quality is guaranteed by the recipe and modern production technologies. The adhesive is intended for gluing in any combination of all types of wood, chipboard, plywood, veneer, laminate, cardboard, fittings, fabric, leather, and some plastics. The glue is used in assembling and repairing furniture, gluing veneer, and laminating.

Compound:

PVA dispersion, plasticizer, dye, additives.

Basic properties:

-High adhesive strength -Medium viscosity -Quick-setting - high adhesive strength is achieved within 5 minutes after pressing -Transparent elastic adhesive seam -Resistant to short-term exposure to water and, in accordance with DIN EN 204, belongs to water resistance group D2 -High heat resistance -Resistant to aging

Package:

125 g, 250 g, 750 g, 3 kg, 30 kg.

Best before date:

24 months

Storage:

Keep glue tightly closed.

Manufacturer country:

Russia

Directions for use:

The surfaces to be bonded must be clean, dry and tightly adjacent to each other. Some types of wood (for example, teak wood) are recommended to be degreased with any solvent at hand, for example, acetone. Recommended wood moisture content is 8-12%. Higher humidity increases setting time. Apply a small amount of glue in a thin layer to one of the surfaces to be glued. To apply the glue, use a brush, plastic spatula or roller. When gluing hardwood, the adhesive must be applied to both surfaces. Connect the parts to be glued together while the glue is still wet. At room temperature 20 °C, the surfaces to be glued must be pressed against each other no later than 10 minutes after applying the glue. Press the surfaces tightly together using any heavy object.