What paint to choose for a wooden gazebo - features and varieties

Application of a protective composition These include the following products:

This means that in addition to the above, they do not allow the floor they have treated to ignite. Most country gazebos have a wooden floor. It has an attractive appearance, is environmentally friendly and practical. But, at the same time, this material is susceptible to environmental influences, which are especially strong in an open gazebo. Therefore, such a floor needs a good protective coating. You will learn about how to cover the floor in a gazebo and how to do it correctly from our article. Plank floor in the gazebo

Correct coating application

Application of a protective composition Despite the fact that it is not difficult to apply a floor covering for a gazebo, certain rules must be followed. First of all, they relate to the safety of the work being carried out. Remember that contact of the chemicals used with the mucous membranes of the body can cause severe irritation. Therefore, all processing actions must be carried out wearing protective glasses, a mask and gloves. The sequence of actions itself is as follows:

1. Before starting work, you need to clean the floor surface from dirt. If a layer of paint was previously present, it should be removed;
2. the boards need to be cleaned. Sandpaper or a wire brush is used for this purpose;
3. you need to wash the floor with warm water and soap or another detergent;
4. After waiting for the wood to dry, you should begin applying the coating. It starts with damaged areas and ends, which are treated with a brush.

Advice! Carefully study the information contained in the instructions supplied with the product. Certain types of paints and varnishes have their own application characteristics, which cannot be ignored. For example, some varnishes for wooden floors cannot be applied in more than two layers to avoid cracking the resulting surface.

1. Two to three hours after the surface has dried, a second layer can be applied. After it dries, you can apply another layer.

It will take a few more days for the gazebo floor covering thus obtained to dry completely. But this period can extend up to two weeks in case of unfavorable weather conditions. The resulting coating needs to be renewed only when cracks appear on it. But for this you need to use a different substance. This will improve the protective properties of the floor surface.

Treated wood will last longer!

Oil impregnations are in demand because they do not hide the natural beauty of wood, but only emphasize it. Many people recommend using varnish impregnations rather than oil impregnations. But the second option is much better. Why? Here are its advantages: A special feature of the wooden floor on the terrace is the way it is laid. If everything is done correctly and taking into account certain rules, you can extend the service life and safety of wooden boards. What does this include? During construction, it is important to lay the boards so as to maintain a gap of 3–5 mm between them. Then moisture will not accumulate on the surface, but will flow into the space under the floor. In addition, this will promote excellent ventilation of the boards, which will allow the wooden floor to dry faster. It is also important to slope the terrace slightly so that water flows along the grooves in the boards. So, it will not stagnate on the surface and spoil the wood on the terrace.

Oil impregnations are in demand because they do not hide the natural beauty of wood, but only emphasize it. The operation of a wooden floor on an open terrace differs significantly from closed structures. The thing is that there is a completely different atmosphere outside, which negatively affects the tree. In the summer, the tree is exposed to sunlight, wind and heavy rains, but in the winter, snow accumulates on the terrace, the boards expand and become deformed. After such unfavorable conditions, the decking board can fail very quickly. What can you do to extend the life of a wooden floor on an outdoor terrace? Wood needs to be protected. Under natural conditions, the tree is protected by bark and several layers of fibers. But how to protect already treated boards?

In fact, there are a lot of options, you just need to find out them and consider the materials for processing. From this article you will learn how to paint a wooden floor on an open veranda to extend its service life. After all, even if you purchased material that was properly processed at the production stage, this procedure must be repeated after a year.

Practical recommendations for painting gazebos

To obtain reliable protection and an aesthetically pleasing appearance of materials, you need to follow the work technology. Painting begins with preparing the surface; the final result depends on its quality.

To obtain reliable protection and an aesthetically pleasing appearance of materials, you need to follow the work technology.

Wood preparation

Painting work should be carried out in warm weather and there should be no precipitation. The preparatory stage includes the following actions:

1. The base is cleaned of all types of dirt and old finishes;
2. Impregnating compounds are applied, a roller or brushes are used;
3. After the base has dried, a primer solution is applied to improve adhesion and cover minor defects;
4. The dried surface is painted in the standard way.

After the base has dried, a primer solution is applied to improve adhesion and cover minor defects.

Precautionary measures

Since the work is carried out outdoors, the air concentration will be acceptable. But the master must protect his skin from contact with materials. Therefore, wear rubber gloves, closed clothing and shoes, and you can wear safety glasses.

The master must protect his skin from contact with materials.

Painting the gazebo will help extend the durability of the structure, and its decorative properties will also improve. It is important to choose the right coloring composition, not forgetting to use antiseptics for additional protection. The wood is carefully prepared before painting.

Protective impregnations for wooden boards

Before considering the effect of impregnations and their characteristics, let's find out what factors contribute to the fact that natural wood that is located outside can deteriorate. We are talking about even the most durable species, such as oak or larch. The factors are:

• biological. The tree is exposed to the negative influence of mold, fungi, insects and rodents. Look at the photo to see what insects can do to a product in a few months;

• weather. Temperature changes, negative temperatures, precipitation in the form of snow or rain, icing, wind, ultraviolet rays - all of them shorten the service life of wood and age it;
• mechanical. This influence is largely human. This may include scratches, gouges, chips or abrasion.

Now that you know what you need to deal with, we suggest you consider materials that will help protect the floor on your outdoor terrace or veranda. If in a store you ask how to paint a larch deck board, the first thing they will recommend is impregnation. They are able to cope with most factors influencing the tree. Impregnations can be divided into 2 types:

1. Washable, which are created on a water basis.
2. Non-washable, containing an oily organic compound.

Most often, terrace boards are coated at the factory with antiseptic compounds. But, antiseptics cope with rotting and biological factors. Therefore, it is better to further process the material, protecting it from moisture, fire and other factors. Moreover, it is quite easy to do it yourself. The ends of the wood are protected with emulsion impregnation. The thing is that the ends absorb moisture better, so they should be better protected. As for antiseptic compounds, it is recommended to apply them to the inside of the floorboard, since most often the boards rot from below, where there is dampness. Fungus, mold and insects thrive there. But the front side is treated either with dyes or oils.

An antiseptic can act: First an antiseptic , then impregnation , and finally an oil film with the Aquatex Extra color .

Antiseptic treatment protection and aesthetics. All wood products, including summerhouses, are susceptible to rotting. Thanks to modern processing materials - paint and antiseptics, you can extend the life of your building by decades.

• How to paint the wooden parts of the gazebo?
• What color?
• How to make it beautiful?

First of all, you need to decide on the type of paint, which will vary depending on the type of wood. Then we will look at protecting wooden walls, pillars and floors using an antiseptic. At the end, the most interesting paint colors will be listed.

Preparatory procedures before staining

Covering the gazebo with paint requires a dry coating, otherwise the solution may crack during use. The material must also be treated with protective agents that will provide strength and protection from various factors. To pre-finish the gazebo, you can use the following solutions:

• Silicate glue. It is a popular composition that helps prevent the formation of mold and mildew. The glue must first be diluted with water until it has the consistency of sour cream. Application is carried out using a brush.
• A mixture containing copper sulfate. For 10 liters of water add 10 g of this substance.
• Composition with the addition of table salt and boric acid. Coating with this mixture should be carried out several times at intervals of several hours.
• Chemical solutions that can be purchased at many hardware stores. Before using them, you should carefully read the instructions indicated on the packaging.
• Antiseptic compounds against insects, which can also be purchased at hardware stores.

Good preparation of the coating will significantly increase the service life of the building and maintain an attractive appearance for a long time. A correctly selected color palette for decorating a gazebo will help create a beautiful interior of a summer cottage that will attract the eyes of guests.

Selection of paints for different woods

New tree

For a fresh gazebo, clear paint works well. It will emphasize the grain of the wood (timber, log or board), and will also create a protective layer on the new material.

For these purposes, you can use the same transparent antiseptic, which in some cases will look even more interesting than regular paint.

With remnants of old paint

If you decide to renew the paint layer on your gazebo, then it is advisable to use the same coloring agent as before. In most cases, this is impossible, since the gazebo could have stood for decades and you have only now decided to “refresh” it. In this case, we proceed like this:

1. Remove as much of the top layer of paint as possible. We are not afraid of damaging the wood, so we use a brush with metal bristles.
2. I would still treat it with an antiseptic after this if you managed to remove most of the residue, but this is not critical.
3. We cover the wood with opaque paint, similar in color to the previous one.

Unedged boards and old wood

Since the structure of the wood is uneven, it is necessary to hide it as much as possible. To do this we need opaque paint applied in a thick layer.

Painting such material is not particularly pleasant, since the consumption is high and it comes with problems, but a better way has not yet been found.

For it and other similar breeds, it is recommended to choose a coating that gives a pale black or light brown color, which more clearly distinguishes the gazebo from the background of the area, especially the landscaped one. In addition to decorative reinforcement, transparent substances serve for various types of wood protection, which is pursued equally. Opaque coatings completely hide the wood texture and allow you to paint the gazebo with a new independent palette, using any color. This is useful if during the construction of a landscape element, partially or completely recycled or insufficient quality material was used. Paint allows you to hide defects. When choosing what to paint the gazebo with, you need to take into account the properties of the products used.

It does not change the color, but gives the wood shine and a velvety surface. Painting a wooden landscape structure in a country house is a banal and inevitable process. The natural color of wood is truly a visual pleasure that only takes a short time to enjoy. The problem of preserving the wood texture or creating a new color scheme smoothly flows into the question of how to paint a wooden gazebo to protect it from outside influences.

How to cover (paint) the floor in the gazebo?

Has your dream of building a gazebo come true?
Then you need to make sure that it always remains reliable, protected from external influences and serves you for a long time. An important aspect is painting the floor, which must be approached with all responsibility. To paint a wooden floor in a gazebo, varnishes and paints that are usually used for outdoor work are ideal. This is oil paint, known since the youth of our parents. If you choose a product with a different base, then keep in mind that it must be resistant to abrasion. In such cases, you can only use paint for surfaces outside the home with the appropriate inscription.

Emphasize pristine beauty

Transparent coatings serve the first purpose - naturalness. Since the gazebo in the country is an open decorative element, among the many compositions you should choose those that can change the color of the texture or emphasize the natural shade. In most cases, the material for the gazebo is pine (board, timber), which in the processed state has a very light tone (nondescript). For it and other similar species, it is recommended to choose a coating that gives a pale black or light brown color, which more clearly highlights a gazebo against the backdrop of a site, especially a landscaped one. In addition to decorative reinforcement, transparent substances serve for various types of wood protection, which is equally pursued.

• Salt compositions – protection against mold and/or combustion. If you plan to use a barbecue or barbecue of any complexity in the gazebo itself or not far from it, a fire-retardant mixture is the recommended coating for the floor and walls. As a rule, it is colorless and is applied to dry, uncoated wood first. The difficulty lies in the process itself: salt coatings are very difficult to penetrate into the fibers. For an optimal level of impregnation, application is carried out under high pressure. This is how fire services usually work when they are called to treat the internal surfaces of the rafter system of a residential building. Salts have a negative effect on metal. If the roof of the gazebo is made of metal tiles, profiles, or sheet steel, it is better to avoid such coverings.

• Water-based solutions are used for finishing. They are ineffective in fighting fire, but they protect the material well from the effects of fungus and moisture. It is easy to apply the mixture even with a brush.
• Among solvent-based impregnations, you should choose colored ones - for a decorative function in the gazebo. Different mixtures provide their own forms of protection: from fire, moisture, insects and even sunburn, so you have to choose a coating to suit your needs. A special feature of the compositions is their rapid penetration into the wood structure, which protects it from the inside. It is logical that the treatment with the product will be initial. Solvent-based mixtures are toxic, but since a gazebo in a country house is an outdoor object with a well-ventilated surface, this option is just right for it. When working with coating substances, you should not forget about PPE: respirators, gloves, etc.
• Oil impregnations are quite simple. They are used during finishing to protect against moisture.
• Unlike oil, varnish not only emphasizes the texture, but also qualitatively changes its shade. For the most part, this is a finishing decorative coating for the gazebo. It penetrates shallowly into the structure, but levels the surface and gives it reflective properties. It is recommended to varnish only the internal surfaces of the gazebo, since the substance is susceptible to moisture and mechanical stress (scratches appear quickly). For the same reason, they should not cover the floor.
• Wax provides moisture protection. It does not change the color, but gives the wood shine and a velvety surface. Requires care and precision when applying.

You need to purchase a suitable composition taking into account the following factors: Builder 6th category

Will there be a fire in the immediate vicinity of the structure? If no measures are taken, the tree in a humid climate begins to rot, and bugs and bark beetles infest it. In addition, many owners would like to use the gazebo as a summer kitchen or a place for gatherings with friends, for which they install a stove or barbecue inside. Careful impregnation will help to avoid possible negative consequences. Even before construction begins, you should buy autoclaved wood boards or timber. In this case, the material will not rot for many years. However, if such a tree turns out to be beyond your means, you can provide reasonable protection to ordinary wood by choosing a suitable impregnation.

Many factors influence the choice of impregnation. You need to purchase a suitable composition taking into account the following factors:

1. Features of the climate in this region. It is important to know whether it rains often here, what the average fluctuations in annual temperatures are, etc.
2. What will be the load on the plank floor? There are compounds that significantly increase the strength of wood, and if you have a large family or often receive guests, this is what you need.
3. Will there be a fire in the immediate vicinity of the structure? If you plan to grill kebabs in the gazebo, you need to choose impregnations with fire retardants.
4. What decorative varnish or paint will the gazebo be coated with? The selected composition must remain neutral to the finishing materials, without changing its color or spoiling the appearance.
5. Ease and convenience of application. Most often, all the work is carried out by the owner of the building himself, so the impregnation should apply easily, without leaving stains or streaks.

What color to choose for painting a gazebo at the dacha

The variety of colors on offer often makes the right choice difficult. It is best to take the advice of experts in this matter. Experts advise painting the gazebo so that it blends in with the buildings located on the site - the house and other outbuildings. At the same time, you should not get carried away with bright colors as the main ones.

A good solution would be varnish . It emphasizes the texture of the wood, which is best previously tinted with stain, but you don’t have to do this. The varnish coating is suitable for cladding new wooden parts and gazebo floors.

Read about the use of various small architectural forms in the landscape design of a site.

There are several popular design solutions for painting gazebos with decorative dyes:

1. Classic white version. It visually increases the internal space, giving the design a new look. Experts recommend white finishes for structures with latticework. The disadvantage of this variation will be constant maintenance, since dirt is very noticeable on a white background.

2. Covering with warm shades of paint (yellow, ocher, etc.). This option is suitable for gazebos built from imperfect timber in order to hide its poor quality and at the same time bring the color of the structure closer to natural.

3. Painting gazebos has become a popular variation blue or green paints. Skillfully selected shades will help create a harmonious exterior that fits well into the color scheme of garden plants and flowers.

4. Black color, despite its severity and lack of color range, is quite often used for painting gazebos.

5. Bright colors often used for painting children's gazebos, as well as to add contrast to some details and furniture inside gazebos - panels, tabletops, chairs, benches, etc.

Surface pre-treatment

To ensure that the impregnation does not lose its properties, it is recommended to treat the wood material in advance in a special way. The work is carried out in two stages:

1. Grinding. You will need a sanding machine (quickly) or you will have to spend a long time fiddling with sandpaper of different grits. The surface is leveled in the same way as before traditional priming or painting.
2. Cleaning. Using a vacuum cleaner, all debris, chips and dust are removed from the sanded surface. The wood can even be washed afterwards.

The same procedure is resorted to if the appearance of a wooden building has clearly faded over the years. Alas, untreated wood loses its beauty over time, darkening and seeming to get dirty. In this case, the external unpleasant coating is removed in the same way - by grinding. It is advisable to apply a primer to the cleaned surface. Next, when the primer has dried, the wood is coated with a couple of layers of antiseptic, applying it with a spray bottle or brush. When the surface is ready, you can begin impregnation.

You can process the gazebo with this material

Helpful advice

The appearance of cracks in wooden beams is almost impossible to prevent. Moisture begins to accumulate in them, which will lead to the destruction of the material. To avoid this, you need to:

1. Small cracks should be re-treated with protective mixtures, primed and then painted over.
2. Large cracks are first coated with impregnating solutions, after which they are filled with putty or plastoelastic non-curing sealant, and the leveled base is painted.

We will talk about how to paint a gazebo in the next article.

If you take timely care of the gazebo, it will delight you with its appearance for a long time, allowing you to relax comfortably on summer days.

Conclusion

A do-it-yourself plank floor in a gazebo requires the application of a protective coating that would prevent the wood from rotting. It can be various antiseptics, paints or varnishes.

There are a number of popular protective compounds. These are wood medicine, biosept, aquatex, elcon and others. Their validity period is no more than 10 years.

More durable is floor treatment using imported products: TIKKURILA, Dulux, ALLICATOR. But the cost of such compositions is significantly higher than that of their Russian analogues.

The video in this article will help you find out more information on this topic. In addition to this, you can find other useful materials on our website.

Did you like the article? Subscribe to our Yandex.Zen channel