Raptor paint for cars colors

Truck Protective Product

Initially, this composition was created as a protective layer for trucks. The bodies of these cars had to be protected for one banal reason - most of the cargo left scratches on the paint surface. Moisture then entered these abrasions, resulting in corrosion. It was necessary to create a protective coating that would not be erased under any conditions.

Composition of the product

Many people are interested in what composition “Raptor” has, what kind of layer it forms. This protective agent is a two-component, high-strength protective coating based on polyurethane. This product, according to manufacturers, can protect not only from the effects of stones or branches. The Raptor protective coating also withstands the effects of corrosion, road reagents, and various mold formations. Also used in extremely low or high temperatures.

This product can be used to restore worn body surfaces of commercial vehicles such as trucks or pickups. After application, a durable layer is formed on the body that does not allow moisture to pass through. It perfectly withstands mechanical impacts of low and medium intensity, as well as ultraviolet radiation.

Raptor paint for cars: advantages and disadvantages

Operating a car inevitably leads to the appearance of defects in the paintwork (paintwork), which provoke pockets of corrosion.

Unnoticeable damage to the paint opens up access to bare metal, which corrodes under the influence of moisture; the lesion quickly expands, which leads to the appearance of through holes.

To prevent the destruction of the car, you have to monitor the condition of the paintwork. An alternative option is Raptor paint, which is designed to protect the body from corrosion.

What is Raptor for cars?

Due to confusion in terms of what “Raptor” is, we note that this is a proprietary composition of the manufacturer U-pol. The product contains polyurethane, which covers the body with a durable layer of protection. Raptor car paint has properties closer to anti-gravel coatings, but the rubber from the classic composition is replaced with polyurethane, which is more durable and hard.

Raptor from Upol is a product with a secret composition, only the main component is generally known, everything else is a trade secret. Taking into account the chemical properties of polyurethane, we can conclude that there are a number of advantages of the material:

increased resistance to abrasive damage;
tensile strength;
resistance to chopping blows;
ability to protect the coating from high vibration loads.

There are other advantages of Raptor paint; they boil down to its high protective properties. The composition is applied using a sprayer.

In what cases is a car painted with “Raptor”?

The proprietary product is highly resistant to impacts from sand and stones and prevents noise from penetrating into the interior. Taking into account the characteristics of the substance, Raptor paint is used for:

processing the lower parts of doors;
bumper and fender coatings;
threshold protection;
applied to pillars and tops of doors where damage from branches and keys is observed.

The increased rigidity of the coating ensures the resistance of the metal body to contact with aggressive environments: moisture, saline solutions, chemicals.

It is especially effective to use paint for cars operated in difficult conditions - SUVs, trucks, small vehicles that often cross dirt and sandy roads.

Raptor paint for cars is a thick composition that applies in a relatively thick layer. The coating plays a protective role, and also absorbs vibration, noise and increases the strength of the body.

It is worth considering that Raptor car paint increases the weight of the car, so covering the entire body with the product is not the best solution. Due to a shift in the center of gravity, the vehicle loses some of its dynamic properties.

Another feature of the layer is the creation of a shagreen texture, which is prone to the accumulation of dirt, but is easily washed and creates a specific appearance.

When painting a car with Raptor, problems may arise with color selection; it is better to contact a professional colorist.

Advantages and disadvantages of paint

The Raptor protective coating has many advantages:

increased resistance to abrasive damage;
the material can withstand high tensile loads;
protects the body from cutting blows;
scratch resistance, and additionally prevents the spread of cuts;
wide range of hardness from 30 Shore A to 80 Shore D;
does not respond to atmospheric influences - ozone, oxygen, water, ultraviolet radiation and heat;
“Raptor” protective coating can withstand high tensile loads;
most types of mechanical processing are allowed;
not prone to sticking of sand and other bulk substances;
ease of cleaning;
reliable protection against corrosion.

The Raptor coating has several disadvantages:

It is not allowed to apply varnish on top of the protective layer, this will neutralize the effect of the “Raptor”, the coating will remain matte;
car paint has a look similar to shagreen leather, the aesthetic appearance is slightly deteriorated;
If you violate the painting technology, there is a risk of chipping.

How much does Raptor paint cost?

The coloring agent from U-Pol is sold in sets:

4 cans of 1 liter each, the neck is designed for installation on a gun;
a can of hardener, it must be added to the working solution;
sprayer (optional).

The cost of the basic kit is 6,000 rubles, and when adding a sprayer, the price increases to 8,000 rubles. To paint the entire car you will need about 10-15 liters of liquid.

How much “Raptor” is needed in an individual case is calculated taking into account the number of elements to be processed and the car model. Hollow parts can be machined on both sides to increase strength.

Painting technology

According to the official instructions, it is necessary to mix the composition with a hardener. The description indicates the proportion of 3 parts of the main product and 1 part of the hardener. There is a mark on each jar, it indicates the amount to which the container is filled, which is approximately 250 g of the second component.

After adding the product, close the jar and shake for 2-3 minutes to completely mix the mixture. The company offers a range of hardeners that differ in the drying time of the coating.

For the warm season, they prefer options with longer polymerization, and in winter the process is accelerated.

To reduce the severity of the texture, thinner S2040 is added to the composition; its concentration should not exceed 10%.

The jar with the prepared solution is connected to a gun, to which the hose of the compressor unit is already connected. If the car coating is prepared, the composition is applied to the body.

It is recommended to start the process from the roof; the master’s movements should be uniform and smooth. The gun is held at a distance of 40-50 cm from the surface to be treated.

During the entire application process, ensure that the layer is laid without overflow.

The manufacturer does not recommend applying a thicker layer, otherwise the coating will become less durable and resistant to mechanical damage. Hardening of the initial layer takes from half an hour to an hour at a temperature of 20°C. Only after acquiring strength is the second layer applied.

After finishing the body treatment with “Raptor” in two layers, be sure to wait for the coating to polymerize. It will take about 1 week until it hardens completely, but the car is suitable for use after 12 hours; stress on the paint is still contraindicated.

Packaging, available colors, configuration features

Raptor paint is supplied both in large packages, the capacity of which is sufficient to treat the body, and in small ones. They are used for partial treatment of damaged areas.

The large package contains 3-4 bottles of 0.75 liters each, as well as one liter bottle. The latter contains a special hardener necessary to fix the composition. It is enough to treat 10-12 square meters of surface.

The kit includes instructions that tell you how to apply the Raptor paint. The colors that are on sale are black and white. But any other shade can be formed using tinting. Black is the most popular - it is purchased in 50% of cases.

Features of preparation

Before applying to the surface, Raptor paint must be prepared. You need to mix the composition and hardener in a ratio of 3 to 1. Since the capacity of the bottles is 750 grams, there is still 250 left to add the hardener. The result is one liter of finished product. The mixture must be stirred for a minute.

The manufacturer offers various options for hardeners. Raptor is sold in various concentrations and with different technical characteristics. There are options that become solid within half an hour after application.

If you purchased a branded kit, then the bottle with the finished mixture is easily connected to the gun that comes with the kit. Now all that remains is to connect the compressor and you can start working. The paint is applied at a distance of approximately 40-50 cm from the surface to be treated. Often, no more than 2-3 layers are applied. This is quite enough. It must be remembered that when applying large layers, the composition may lose its strength, which will lead to unpleasant consequences.

Staining order

The pigment is introduced into the paint and varnish material before adding the hardener. The amount of color determines the brightness of the finished coating, which must be taken into account in advance. In order not to make a mistake with the shade when coating individual parts, it is better to carry out tinting using special equipment. For painting small equipment and bicycles, it is quite possible to do the coloring on your own.

Materials, tools

It is best to paint using a special sprayer that has a spray control function. This will help reduce the number of air bubbles formed and eliminate the presence of strokes that the brush leaves.

But, as indicated in the instructions, if you have certain skills, you can use rollers and brushes for the job. A small brush should be on hand for touching up hard-to-reach areas.

You need to put rags and rags on your work area to remove paint drops and streaks. For preparatory work you will need a grinding machine.

Preparation

The better the preparation of body parts, the better the final result in painting. First, remove all unnecessary accessories from the machine:

wipers;
pens;
mirrors;
bumpers and others.

All non-removable parts that will not be painted should be covered with paper tape around the edges and covered with paper. You can remove the paper only after the paint and varnish coating has completely dried.

It is highly undesirable to apply new paint over old paint. In defective areas, the thickness of the coating will vary, and the durability of the finished film will decrease. The entire surface of the parts must be thoroughly cleaned of old paint, for which a grinding machine with a fine abrasive is used. This should not be done manually due to the risk of reduced quality.

The next procedure is as follows:

remove dust, dirt, and small particles of paint that appear after sanding manually or using a compressor;
wipe all parts with anti-silicone and white spirit;
chips, holes, and other defects are filled with special automotive putties;
allow the parts to dry thoroughly;
treat the products with a special auto-primer and dry again;
Start painting the body.

Security measures

The material is highly flammable. When a fire hits, the paintwork immediately flares up, so there should be no sources of combustion near the place of work - cigarettes, stoves, etc. In the garage, it is better to check the wiring in advance to prevent short circuits and ignition.

During work, there is a risk of damage to the mucous membrane of the eyes - its inflammation, drying out, and therefore you should work in safety glasses. Due to allergies and drying of the skin of the hands, they work only in comfortable gloves, and wear special clothing on the body.

Since inhalation of toxic fumes leads to poisoning, the following safety precautions should be taken:

the room should be well ventilated, and even if there is a general exhaust hood, it is better to install additional mechanical ventilation;
You should use a respirator and go out into fresh air as often as possible;
After finishing work, all used devices and materials must be filled with water until they are cleaned (solvents are used for this), the rags should be packed in tight bags, and then disposed of.

To avoid damage and fire, store Raptor paint in a dark place, out of direct sunlight, at a temperature not higher than +70 degrees. The container must be tightly closed.

Instructions for using paint

First, you should dilute the paint with a hardener. For 3 parts of Raptor, 1 part of the hardener, which is included in the kit, is injected. There is a mark on the paint can up to which the hardener is poured (for 750 ml of the main composition you will get 250 ml of the latter). Then the jar must be tightly closed and its contents shaken for 2 - 5 minutes to thoroughly mix.

The operating procedure is as follows:

Screw the gun onto the can and connect the hose from the compressor.
Start applying the first coat of paint, starting with the roof of the car.
You must act with uniform movements, without jerking, hold the gun 50 cm from the part (the layer should lie without overflow).
Too thick a layer causes a decrease in the mechanical strength of the paint, so the thickness of each sublayer does not exceed 1 - 1.5 mm.
To dry the first layer you need 0.5 - 1 hour at a temperature of +20 degrees, after which you can apply the second in the same way.
The total polymerization time for Raptor is up to 5 – 7 days, but operation of the car is permissible after 12 hours (loads and mechanical stress are excluded in the first week).

For tinting, you should buy a Raptor set with white (milky) paint. There are pigments from the same brand in stores that are ideal. The amount of color added does not exceed 10% of the paint weight. If you have difficulty with tinting, you should contact a professional colorist.

To accurately select a color when painting individual parts, find out the VIN code of the car’s paintwork in advance, and then look for the color using special reference books.

Application Features

In general, “Raptor” paint (there is a photo of it in our article) is practically no different from ordinary paint. But the application process is different from conventional paint coatings. The manufacturer claims that work can be done directly in the open air. But it is better to carry out work in a box where there is no dust, wind and no rain.

Next, remove the gloss. This can be done with abrasive discs. Why do this? This is done so that the protective coating adheres better to the surface. After this, the surface is treated with special etching primers. Plastic parts are coated with adhesive primers.

After drying, you will get a rough surface with shagreen. It must be said that the level of shagreen is adjusted with a spray gun. At increased pressure the level of roughness will be almost minimal.

a brief description of

There are many ways to achieve this goal, but they are not very effective. In this regard, a special paint Raptor was developed, the main focus of which is its protective function.

Car paint Raptor is an ideal two-component urethane substance to protect the paintwork of a car from the effects of water, dirt and other negative factors.

Protects against the appearance of rust, mold and the effects of sudden temperature changes.

In addition, after applying this enamel to the body, the degree of surface strength increases in relation to the effects of ultraviolet radiation and mechanical damage.

The Raptor product is capable of maximally restoring already damaged coating. Moreover, the paint is available in different colors - from dark blue to bright yellow. Everyone will be able to choose the optimal color solution for themselves.

Main advantages

Let us list all the advantages of the material, thanks to which it has become in demand among car owners:

paint consumption is optimal, it is enough for a fairly large area;
application can be carried out in any way (roller, brush or spray);
the paint dries in a fairly short time;
During operation, the coating does not fade or fade, and can withstand certain loads under mechanical stress;
excellent performance in providing noise and vibration insulation;
a very high degree of adhesion is inherent;
preparing the surface for painting does not require any special techniques;
When performing work, no special conditions are required; painting can be done even on the street;
the paint does not require any special actions in preparation for work; just shake the aerosol well;
the period of action of the applied substance is quite long, so there is no need to carry out treatment frequently;
application can be carried out either directly on the metal or on the old coating;
no need to seal with varnish after application;
wide range of applications, the paint is especially good as an anti-vandal agent.

Painting technology

As already mentioned, the paint application procedure is simple and you don’t have to put in much effort. But, nevertheless, painting is carried out according to a certain algorithm, so as not to spoil the surface of the body and not harm your own health.

Surface preparation

Initially, you should prepare the car body for painting, especially if the substance will be applied to its entire surface.

At the first stage, we free the body from all the parts located on it: headlights, sidelights, bumpers, mirrors, etc. After this, carefully inspect the surface.

In places where there are defects, we sand to remove rust or peeling paint. If there are dents, they should be straightened. Open areas must be degreased and primed.

After we have treated the problem areas, we begin to remove the gloss from the entire body using R-80 sandpaper. At the final stage of preparing the car for painting, we protect all non-removable elements with film, paper and masking tape.

Important! Despite the fact that painting with Raptor paint can be carried out even outdoors, to guarantee quality and comply with safety rules, it is still better to use a special hangar or garage.

Preparation of materials and tools

After the car is ready for painting, we prepare materials and tools for the procedure. Rags, paint brushes and rollers should be at hand.

It is better to do the main work using a special spray gun.

Of course, you can use a roller, but it should be noted that the quality of the surface will be slightly different from what you get after spraying.

Using a gun, you can adjust the spray jet; the number of air bubbles formed will be significantly less. We will also get rid of the strokes that a regular paint brush can leave.

To ensure a high-quality surface, it is important to purchase the required amount of paint. To do this, certain calculations are carried out, since the consumption of the substance depends on the condition of the surface and the number of layers applied. If you find it difficult to make the calculation yourself, it is better to contact specialists with this question.

As for preparing Raptor paint for painting, following the instructions, it must be mixed with a hardener in a ratio of 3:1. Moreover, on the container itself where the material is located, there is a special line at the level of which the hardener should be poured.

After this, the jar is tightly closed and shaken thoroughly for several minutes. There are hardeners with different drying intervals. Thanks to this, you can regulate the drying time of the painted surface.

To reduce the surface structure, it is recommended to add S-2040 solvent to the mixture of paint and hardener in a ratio of 10:1.

Coating

After the mixture is ready for use, put a gun on the jar. The sprayer itself is connected to the compressor via a special hose. This is how painting is done.

There are some tips for applying paint:

It is better to start painting from the roof of the body.
Movements should not be sudden; it is necessary to ensure that the layer is applied evenly.
The distance from the surface to the sprayer should be 40-50 cm.
The time to dry the first layer is about an hour, provided that the air temperature is 20°C.

It should be noted that applying a thicker layer leads to a decrease in the strength and resistance of the coating to mechanical damage.

After the second layer of the substance is applied, it will take about a week for the paint to dry completely. But this does not mean that the car cannot be used. You can use it within 12 hours after completion of the work, but make sure that no load is placed on the surface.

Safety precautions during operation

Like most dyes, Raptor paint has a certain negative effect on humans and a list of precautions:

the material is flammable;
when painting, irritation of the mucous membrane of the eyes may occur;
in direct contact with skin may cause burning and dryness;
Inhalation of vapors may cause dizziness.

In this regard, when carrying out work, we must adhere to a number of precautions:

The room in which painting is carried out must be well ventilated. Additional mechanical ventilation is recommended during operation. It is necessary to take frequent breaks and go out into fresh air, and use safety glasses and a respirator while working.
Smoking is strictly prohibited; paintwork materials should be used away from open flames.
All material that came into contact with the paint (brushes, rollers or rags) must be folded and stored in a separate container, and after finishing work, fill it with water until completely covered.
Paint should not be spilled, and painting work must be performed in special clothing.
The paint is stored in a separate, dark place that is difficult for strangers to access. The optimal temperature for storage does not exceed 80°C. All containers must be tightly closed.

Advantages and disadvantages

Painting with “Raptor” is possible with your own hands, which is an undeniable advantage. After application, sound insulation will improve - stones knocking on wheel arches is much quieter. The composition protects the metal of the body from moisture, temperature influences, and reagents. The protective layer reliably protects against corrosion. The product has good adhesion not only to any metals, but also to any other materials. No special conditions need to be observed for coloring. The composition is easily applied either with the supplied gun or with a brush. The body does not require special preparation. The manufacturer notes that the protection will last for a long time.

Advantages and disadvantages of Raptor car paint

Advantages and disadvantages

You can do car painting yourself (in the garage);

spraying paint does not require special preparation;

"Raptor" adheres well to metal and plastic surfaces;

can be applied over old paint (it is recommended to pre-treat the surface with sandpaper);

applied using a spray gun, roller or brush;

the best quality and even coating is achieved by using a paint sprayer;

protects against corrosion, mechanical damage, impacts from small stones while driving;

the painted surface does not heat up, does not allow moisture to pass through, and does not fade in the sun;

sand and dust do not stick to the coating;

the painted surface is not exposed to road chemicals, gasoline, oils, acids, salts, mold;

After painting, the car can be washed in a car wash;

painting gives the car a unique look that helps protect against theft.

complete polymerization of the coating occurs within 21 days;

It is prohibited to apply additional protective varnish to the painted surface;

gives a matte shine;

the coating does not have a smooth and glossy, but a rough appearance;

when painting, you must strictly follow the instructions and observe the dosage;

The Raptor coating (if necessary) is difficult to remove from the surface.

Results

Raptor really protects the surface. If applied correctly, it will last a very long time. You should also consider how much “Raptor” (paint) costs. The price is 6900 per set. The car looks very impressive and interesting. Black looks best. The composition repels water. Since the coating is unique, it is a good protection against theft. If you want to sell the car, there will be problems - the view is still unique. If an accident occurs, not everyone will agree to paint the car.

This is what it is – “Raptor” paint. Reviews show that the product is truly effective, and this is not just another marketing.

Many car owners want the attractive appearance of the body to be preserved for as long as possible. Dirt, scratches, flying stones - all this negatively affects the protective paintwork of the body. Cracks, scratches, chips appear, and then rust. This is especially true for off-road driving enthusiasts, who care not so much about appearance as about protecting the body from corrosion.

The body can be protected using galvanic coatings, galvanizing and special primers. But all these methods are not effective and durable enough. Therefore, many people turn to using Raptor coating. Raptor car paint protects the body from exposure to water, sand, stones, and gravel. With such a coating, the car is not afraid of difficult operating conditions, so the Raptor is ideal for off-road vehicles.

Let's sum it up

Based on all of the above, we can confidently say: such a car coating provides complete protection from almost any negative impact. The processing process is within the power of almost every car owner and does not require too much material costs. If we compare the cost of the set with the services of painting a car at a service station, then “Raptor” completely pays for itself.

The main thing is to strictly follow all technological requirements when working with this paint. Please note that if the technological process is not followed, the paint will simply fall off in pieces.

Features of painting with Raptor
In other words, chips form on the surface of the car, which are very problematic to eliminate. To prevent this from happening, you just need to do good preparatory work before applying the substance to the car.

A car coated with Raptor U Pol is reliably protected for many years. Even when used in the harshest conditions.

Author: Baranov Vitaly Petrovich

Education: secondary specialized. Specialty: car mechanic. Professional diagnostics, repair, maintenance of passenger cars of foreign production 2000-2015. Extensive experience working with Japanese and German cars.

Andrey says:
We have repeatedly heard that there is a protective coating for paint that restores and protects the surface from various types of damage. Can you tell me more about what this is?
Titus says:
I bought the Raptor English kit for myself for 12 thousand - I processed my UAZ. I often wander through the woods, so I decided to take care of the paintwork. I had to spend about 5 days processing it - there is quite a long preparation process. Then it dried for another two weeks - this period is needed for complete hardening. I can’t say anything yet - I almost didn’t travel.
Andrey says:
Wow. What should I apply it with? And is it difficult to prepare the product itself?
Ekaterina says:
Good afternoon. There is no need to prepare anything - the liquid is completely ready for application. To process the body, you can use a gun, roller or brush.
Evgeniy Khaulevich says:
Hello, is it so easy to apply with a regular brush? How are heating radiators at home?
Alexey says:
Yes, it’s that simple! But still, for better adhesion you need to prime. It can be scratched with a screwdriver and a nail, but not with keys or branches.

Protective coating "Raptor"

Raptor is a 2-component polyurea elastomer (polyurea) of increased strength.
The Raptor coating, due to its composition, allows you to obtain a seamless elastic insulating coating. Raptor car paint protects the body from mechanical damage, corrosion, reagents, mold, and temperature changes.

The composition is also used to restore worn body parts. After applying the Raptor coating, a protective layer of increased strength is formed on the body, which protects it from exposure to water, mechanical damage and ultraviolet radiation.

Packaging, accessories and color

You can buy Raptor for car painting in a specialized store or online. Raptor car paint is sold in standard packaging - 4 0.75 liter bottles, plus 1 1 liter bottle of hardener, which is used to fix the paint. The material of this kit is enough to cover up to 10 square meters. m. of flat surface in one layer. Kits with a paint spray gun are also sold. It is used when it is necessary to ensure an even coating. If you want to paint the sides or bottom, then the paint can be applied with a brush.

The Raptor is available in two colors – black and white. The most popular color is black. If you need a different color, buy white paint and mix it with the desired color.

Color palette

Raptor paint products are presented mainly in two colors: black and white. You can achieve the desired shade using tinting. The selected color is added to the white paint. Using pigment, you can paint a car green, gray, blue, red. It is prohibited to use acrylic pigments for tinting.

Expert opinion

Zakharova Irina Yurievna

Cleaning professional with 15 years of experience. Our best expert.

Ask a Question

In order to obtain the desired color, special color pastes for solvent-based polyurethane coatings are purchased. It is prohibited to use water-based colors.

Advantages and disadvantages of paint

Before you decide to paint your car with Raptor, you should take into account all the nuances and weigh all the pros and cons. Let's talk about it. Raptor painting reviews, pros and cons.

The advantages of Raptor auto paint are as follows:

No special qualifications are required for application; it can be applied manually with a brush or gun;
The coating increases the sound insulation of the body;
Raptor paint for cars protects the body from moisture, reagents and extreme temperatures, etc.;
The coating protects the body from corrosion;
The composition is easily applied to various types of surfaces, metals and other materials, has a high degree of adhesion;
No special room or conditions are required for application; you can even paint in the garage;
Various application methods: gun, roller, brush;
No careful preparation of the body is required before applying paint;
Cost reduction of 20% compared to traditional coatings due to reduced application time and longer service life.

Flaws:

Only one type of surface is possible - matte;
Inherent roughness of the coating;
The composition gains full strength only 21 days after application;
It is difficult to remove from the surface if necessary.

How to apply correctly

You can paint your car yourself, for example, in a garage. You need to work with the Raptor composition wearing a respirator and with the doors open. You can entrust the painting of your car to a specialist. In this case, painting will cost more.

Required materials and tools

To perform staining you need the following tools and materials:

primer (adhesion promoter) for plastic;
two-component primer (acid, etching) for metal;
putty;
paint and hardener;
pigment;
spray gun;
tassels;
degreasing solvents;
tools for polishing and abrasive processing (sandpaper P80-P280);
rags, sponges.

Preparing for coloring

Before painting, the surface must be prepared, that is, cleaned of dirt and primed. After preparing the car, the composition is prepared. A hardener is added to the paint in a ratio of 3 to 1, that is, 250 ml of hardener is taken per 0.75 liters of paint.

Painting technology

The car is painted as follows:

prepare the composition (paint, hardener and, if necessary, pigment and solvent);
shake the mixture thoroughly;
remove the lid, attach a paint sprayer to the jar with the finished composition;
regulate pressure (jet size);
the finished mixture is used for 60 minutes;
painting is carried out with a spray gun, roller or brush;
if a sprayer is used, it is recommended to spray paint from a distance of 40-50 cm;
they paint the interior parts of the body for testing to look at the texture (how the Raptor lays down);
paint the entire surface in one layer and wait 60 minutes for the paint to dry;
paint over all places, leaving no voids;
after the first layer has dried, paint the surface one more time;
the optimal number of layers is 2 (two).

How long does it take to dry?

After applying the first layer to the surface, wait 60 minutes for it to dry. Then the car is painted a second time. Application of 2 layers is done by spraying over the first. During drying, you need to ensure that water, dust and no objects are placed on the surface for 60 minutes. The disappearance of stickiness to the touch occurs in 1 hour at a temperature of 20 degrees Celsius.

It is not recommended to drive the car until the paint has dried. In the first 72 hours after painting, you need to ensure that the coating does not come into contact with water. Complete drying of the painted surface occurs within 5-7 days. Polymerization lasts 21 days. For the first month after painting, the car should be protected from moisture and dirt.

How to correctly calculate car paint consumption

The consumption of Raptor depends on the area of the surface to be painted. Before purchasing paint, you need to make a calculation. It is important to know the length, width and height of the body. Calculate the surface area of each side. To do this, the length is multiplied by the width (S=A*B). The areas to be painted on each side of the car are summed up.

The cost of "pleasure"

How much does Raptor paint cost?
The average cost of a standard set of four cylinders with paint and hardener is about 6 thousand rubles. A set with a pistol will cost an average of 7.7 thousand rubles. The total price of Raptor coverage including the pistol will cost 13.7 thousand rubles. Raptor painting price. To paint a car with Raptor you will need at least 3 sets, and this “pleasure” will cost 18 – 24 thousand rubles. subject to self-staining. If you decide to paint the car in a workshop, then the price of painting the car with Raptor will be higher by the amount of the cost of the master’s work (about 10 - 20 thousand rudders). Painting a Raptor with your own hands is carried out in several stages, let's look at it in detail.

Conclusion

Raptor is an excellent solution not only for off-road enthusiasts, but also for car owners of all categories. The Raptor coating protects the car body from aggressive environmental influences, this is especially true for regions with sudden temperature changes, and from mechanical damage. You can also use Raptor to restore the body from corrosion. Painting with Raptor paint saves money and keeps the car body in excellent condition for many years.

Share your information and tips in the comments, and you can also share this interesting article with your friends on social networks!

Good day everyone, dear readers!

In this blog I would like to address one of the most frequently asked questions: “How to get the right Raptor color? What is the protective coating tinted with?”

Tinting Yu-pol Raptor and other polyurethane materials without compromising the mechanical characteristics of the coating

Recently, the question of tinting the color of the Raptor has become a fairly common question. As always, there are many opinions on this matter on the Internet, but we are accustomed to using official information from the manufacturer and real tests.

Main advantages

Despite the fact that there are simply a huge number of polyurethane products for protecting the car body on the car market, choosing a truly high-quality one is not so easy. To prevent unpleasant consequences, it is better to give preference to a brand that has already proven itself. This is exactly what U Pol Raptor is. This paint has been on the market and in demand for more than 60 years.

It is noteworthy that initially this paint was intended only for painting concrete and wood surfaces to protect against moisture and destruction.

Polyurethane coating U Pol (“Raptor”) and all consumables for it are specially designed to protect the car body. The emphasis in this case is on SUVs, pickups and trucks.

Painting a car body with Raptor
In general, we can highlight the following main advantages of this protective coating:

excellent resistance to the aggressive effects of most chemical elements;
protects the car body from exposure to sunlight and ultraviolet rays;
the color does not fade;
easy and simple to clean from dirt and dust;
serves as a good soundproofing material;
absorbs vibrations;
protects the car from corrosion.

But at the same time, one should take into account this fact: the surface of the car becomes dull and bumpy. This cannot be corrected, since polishing and varnishing in this case is strongly not recommended. The car looks unusual after painting with U Pol.

Application areas for Raptor U Pol coating

As for the color, it can be changed using special pigments for the “Gender Raptor”. You can choose any color for the protective coating of the body, regardless of what color the car was before.

It should also be noted that if the preparation and painting requirements are not followed, chips may form on the surface of the car.

Eliminating this later will be very problematic, since U Pol paint practically does not wear off.